 |
 |
 |
 |
 |
 |
|||||||||||||||
|
|
 |
 |
 |
 |
 |
 |
 |
|
||||||||||||
|
|
|
|
|
|||||||||||||||||
 |
|
|||||||||||||||||||
|
|
||||||||||||||||||||
|
Motors We have partnered with SOMFY to provide you with top of the line motors for your blinds. Below are details on these motors.
Somfy LT30 12VDC RTS RF Technology Roller Shade Motor
The NEW Round Head Somfy LT30 Shade Motor is a battery operated motor designed for specific use with roller shades. The latest version of the RTS shade motor offered eliminates the tear drop still used on the IR motor. The Somfy LT30 motors can be configured for use with 1.5” Rollease tubes or 1.25" Rollease Tubes. The Somfy LT30 RTS Round Head Motor is controlled via Somfy's RTS RF technology which offers the user single or group control as well as X10, Timer, RS232 Control etc. This is a simple, easy to use and easy to install solution for your shade motorization needs. This motor can be powered via 12VDC batteries as well as wall plug-in transformer.
The Somfy LT30 Shade motors can be used to retrofit your existing Chain/Clutch shades provided they use aluminum Rollease tubes. The motors due use the Rollease RB360 brackets so the brackets you are currently using may have to be changed as you may originally have the 1 ½” RB560 brackets typically supplied with 1.5” chain driven roller shades. Please use the products and data listed in this section of our website for comparison.The Somfy LT30 motor stores the limits set by the remote controls and memory is not lost when power is disconnected. The momentary press of a button you can command the shade to go to the Full up, Full Down and a customer specified preferred Position. No need to hold the button down and wait for the shade to reach the desired position.
Somfy LT30 RTS 12V Roller Shade Motor Specifications:
• Operating Voltage: 12VDC • Max Current Draw: 1.0A • Torque: 1.1Nm • Motor Speed: 27 RPM • Lift Capacity - Not including Tube Weight - 1.25" Tube: 9.68lb - 1.5" Tube: 8.07lb - 2" Tube: 6.05lb • Standard RTS RF Control Only • Compatible with Somfy RTS RF Control Technology • Requirements for use - Not Included - LT30 Power Connector - Power Supply - IR Remote Control - 1.25” or 1.5" Aluminum Rollease Tube - Rollease RB360 Brackets • Warranty 5 years • Includes: Motor Only as shown in the picture • Options (For Specs see separate listings below) - Power Supply - LT30 Connector w/ 10' Leads Only - No Power Supply or Battery Holder - 12VD100W - White 12VDC 1Amp Wall Plug Power Supply - No LT30 Connector - Reloadable Battery Wand - (Requires 8 Lithium AA Batteries NOT Included) - Reloadable Battery Wand with Set of 8 Energizer Lithium AA Batteries - RF Remote Controls - RB360 Brackets – Pair – Both Ends - Rollease REP53 End Plug for 1.5" Rollease Tubes - Rollease REP03 End Plug for 1.25" Rollease Tubes - Rollease 1.25" Tubes - 1 to 8 Foot +/- 0.25" - Rollease 1.5" Tubes - 1 to 8 Foot +/- 0.25" • Dimensions - Overall: 10.5” L x 1.75” W x 3.5” H - Tube insertion length: 10.625” • Weight: App. 9oz (.55 lb) • Somfy Part # 1000637 Somfy 12V Disposable Battery Wand - 9013260
Somfy 9013260 12V Disposable Battery Wand Specifications:
Designed for use with Somfy LT30 Motors Output Voltage 12 Volts DC Lead Length: 8” Lithium AA Batteries Included Batteries are not replaceable Dimensions: 16” L x 0.6875” W x 0.6875”H Optional Mounting Clips - NOT Included Somfy Part # 9013260 Stocking Levels - Very low - Lead Times Vary - 3 to 7 Days Somfy Part # 9014020 Reloadable wand is a good replacement
The Somfy LT30 Shade motors can be used to retrofit your existing Chain/Clutch shades provided they use aluminum Rollease tubes. The motors due use the 1 1/8” Rollease RB360 brackets so the brackets you are currently using may have to be changed as you may originally have the 1 ½” RB560 brackets typically supplied with 1.5” chain driven roller shades. Please use the products and data listed in this section of our website for comparison. The Somfy LT30 motor stores the limits set by the remote controls and memory is not lost when power is disconnected. The momentary press of a button you can command the shade to go to the Full up, Full Down and a customer specified preferred Position. No need to hold the button down and wait for the shade to reach the desired position.
Somfy LT30 RTS 12V Roller Shade Motor Specifications:
• Operating Voltage: 2VDC • Max Current Draw: 1.0A • Torque: 1.1Nm • Motor Speed: 27 RPM • Lift Capacity - Not Including Tube Weight - 1.25" Tube: 9.68lb - 1.5" Tube: 8.07lb- 2 " Tube: 6.05lb• Standard RTS RF Control Only • Compatible with Somfy RTS RF Control Technology • Requirements for use - Not Included - Power Supply - RTS RF Remote - 1.25" Aluminum Rollease Tube - Rollease RB360 Brackets • Warranty 5 years • Includes: Motor Only as shown in the picture • Options (For Specs see separate listings below) - Power Supply - LT30 Connector w/ 10' Leads Only - No Power Supply or Battery Holder - 12VD100W - White 12VDC 1Amp Wall Plug Power Supply - No LT30 Connector - Reloadable Battery Wand - (Requires 8 Lithium AA Batteries NOT Included) - Reloadable Battery Wand with set of 8 Energizer Lithium AA Batteries - RF Remote Controls - RB360 Brackets – Pair – Both Ends - Rollease REP03 End Plug for 1.25" Tube - Rollease 1.25" Tubes - 1 to 8 Foot +/- 0.25" • Dimensions - Overall: 10.5” L x 1.75” W x 3.5” H - Tube insertion length: 10.625” - Tear Drop length below tube: 1.75”• Weight: App. 9oz (.55 lb) • Somfy Part # 1000475
Somfy Sonesse
ST30 24VDC RTS RF Technology Roller Shade Motor
The NEW Somfy Sonesse ST30 Shade Motor is an ultra-quiet 24VDC motor designed for specific use with roller shades. The Sonesse ST30 motors are engineered with superior noise reduction technology and from a distance of 3 feet, are barely heard. The compact, low profile Sonesse 30 motor is designed for tubes as small as 1.5” in diameter and is easily concealed within headrails, cassette systems or smaller pocket sizes. The Sonesse motors feature built-in Radio Technology Somfy R and also speed regulation for precise alignment of adjacent shades. The Somfy Sonesse ST30 motor is std configured for use with 1.5” Rollease Tubes and can be adapted up to 2" Rollease Tubes. The Somfy ST30 RTS Motor is controlled via Somfy's RTS RF technology which offers the user single or group control as well as X10, Timer, RS232 Control etc. This is a simple, easy to use and easy to install solution for your shade motorization needs. This motor is powered via 24VDC from a wall plug-in transformer or hard wired power supply.
The Somfy Sonesse ST30 Shade motors can be used to retrofit your existing Chain/Clutch shades provided they use aluminum Rollease tubes. The motors due use the Rollease RB360 brackets so the brackets you are currently using may have to be changed as you may originally have the 1 ½” RB560 brackets typically supplied with 1.5” chain driven roller shades. Please use the products and data listed in this section of our website for comparison.
The Somfy Sonesse ST30 motor stores the limits set by the
remote controls and memory is not lost when power is
disconnected. The momentary press of a button you
can command the shade to go to the Full up, Full
Down and a customer specified preferred Position. No
need to hold the button down and wait for the shade
to reach the desired position.
• Operating Voltage: 24VDC • Normal Current Draw: 0.75A • Torque: 2.0Nm • Lift Capacity - Not Incuding Tube Weight - 1.5" Tube: 17.6lb - 2" Tube: 13.2lb - 2.5" Tube: 11lb • Motor Speed: 28 RPM • Ultra-Quiet Operation : 44dBa • Standard RTS RF Control • Compatible with Somfy RTS RF Control Technology • Preconfigured for 1.5" Rollease Tubes • Requirements for use - Power Supply - RTS RF Remote - 1.5” Aluminum Rollease Tube - Rollease RB360 Brackets • Warranty 5 years • Includes: Motor Only as shown in the picture • Options (For Specs see separate listings below) - Power Supply - 24VDC 0.75 Amp White Wall Plug Power Supply - 24VD075W - RF Remote Controls - RB360 Brackets – Pair – Both Ends - Rollease REP53 End Plug for 1.5" Rollease Tubes - Rollease 1.5" Tubes - 1 to 8 Foot +/- 0.25" • Dimensions - Overall: 16” L x 1.75” Dia - Insertion Dia: 1.135" - Tube insertion length: 15.5” • Weight: App. 1.43lb • Somfy Part # 1000460
Somfy Sonesse
ST50 120VAC RTS RF Technology Roller Shade Motor
The NEW Somfy Sonesse 50 ST50 Shade Motor is an ultra-quiet 110VAC motor designed for specific use with roller shades. The Sonesse ST50 motors are engineered with superior noise reduction technology and from a distance of 3 feet, are barely heard. The heavy duty Sonesse 50 motor is designed for tubes as small as 2” in diameter and does not have any practical limits with respect to it use with roller shades. The Sonesse motors feature built-in Radio Technology Somfy R and also speed regulation for precise alignment of adjacent shades.
The Somfy Sonesse ST50 motor is std configured for use with 2 smooth wall tubes and can be configured for up to 4" Tubes. The Somfy ST50 RTS Motor is controlled via Somfy's RTS RF technology which offers the user single or group control as well as X10, Timer, RS232 Control etc. This is a simple, easy to use and easy to install solution for your shade motorization needs. This motor is powered via 110VAC and has several cord options to allow for receptacle plug or direct wiring.
The Somfy Sonesse 50 motor stores the limits set by the remote controls and memory is not lost when power is disconnected. The momentary press of a button you can command the shade to go to the Full up, Full Down and a customer specified preferred Position. No need to hold the button down and wait for the shade to reach the desired position.
Somfy Sonesse 50 ST50 RTS 120VAC Roller Shade Motor Specifications:
• Operating Voltage: 120VAC • Normal Current Draw: 0.95A • Torque: 4Nm • Lift Capacity - Add Tube Weight - 2" Tube: 35.2lb - 2.5" Tube: 28lb • Motor Speed: 32 RPM • Ultra-Quiet Operation : 44dBa • Rubber Drive Provide Quite Operation • Heavy Duty Applications • Standard RTS RF Control • Compatible with Somfy RTS RF Control Technology • Preconfigured for 2" Smooth Wall Tubes • Star Head Design Locks into Brackets • Removable Power Cords - Supplied w/ Open Ends • Requirements for use - Power Supply - RTS RF Remote - 2" or Larger Roller Shade Tube - Somfy Brackets Brackets • Warranty 5 years • Includes: Motor, Drive Stop and Cord • Options (For Specs see separate listings below) - RF Remote Controls - Motor Head Bracket - Idler End Brackets - Idlers - Drive Gears - Crowns • Dimensions - Overall: 31” L x 2.25” Dia - Insertion Dia: 1.82" - Tube insertion length: App. 30” • Weight: App. 5.62lb • Somfy Part # 1030065
|
|
|||||||||||||||||||
|
|
||||||||||||||||||||
|
|
||||||||||||||||||||
|
Home |
Products |
Services |
Our Work |
Get a Quote |
Order Online |
Contact Us |
|
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
